COATER/LAMINATOR - Gravure

Listing #

12811

Manufacturer

Faustel

Model

L/D Ratio

Size

36"

Year

1969

36" Faustel Coater Laminator with Rotoflex closed-chambered doctor blade system, 3 anilox rolls, approx. 24 transfer rollers of various widths, gas drying, heated/chilled laminating rollers, and recently updated tension controls and drives, Don't be fooled by the 1969 age of this machine! It has many updates, it runs daily, and has proven to be very reliable. it includes roller stands and racks, and can be seen producing finished product. Specs at a glance: 36" lamination width Single shaft unwind and rewinds Updated tension controls Web guide system Updated main drive and controls 3 anilox rollers 24 adhesive rollers Racks for roller storage

BAG MACHINE - Bottom Seal

Listing #

12992

Manufacturer

Gloucester

Model

418

L/D Ratio

Size

40"

Year

1995

Used 40" Gloucester Inline Bottom Seal Bag Machine. Very Clean. Good operating condition.

BAG MACHINE - Side Weld w/ Bottom Seal

Listing #

12991

Manufacturer

Lung Meng

Model

L/D Ratio

Size

48"

Year

2005

Lung Meng 48" Bag Machine with unwind station and powered indexing table. The machine includes an electric punch and electric eye to convert printed bags. It will produce sideweld or bottom seal bags. Very Clean Machine in godd operation condition. It includes 2 extra seal bars.

FLEXO PRESS- LABEL and INLINE - 8 Colors

Listing #

12979

Manufacturer

Mark Andy

Model

4200

L/D Ratio

Size

10"

Year

2000

Mark Andy 4200-10F Serial # 1189487 Installed in mid 2000 8 color UV or waterbase 10 inch wide 40" unwind Double sided Corotec Corona treater Herbert double sided web cleaner Automatic register system (Print to Print and print to Die) 1 print unit with web reversing gear box and enclosed Doctor blade assembly (for printing on either side without using turn bars) UV and air drying on all 8 print stations Movable laminator Movable turn bar I.Kela Rotary hot foil stamping unit Vits-America three stream foil saver unit BST Promark Handy Scan Video and monitor 8 peristaltic ink pumps Dual slot Die-cutting module with die handling hoist 24" or 40" rewind + conveyor with static elimainator Minimum print repeat: 5.5" Maximum print repeat: 24" PM-160 plate mounter with video camera Large quantity of ceramic anilox rolls and hardened plate cylinders Prepped for in-line variable ink-jet imaging (Domino ink-jet heads available if required) 1/8" CP primary gearing 230volt, 3 phase, 60Hz

BLOWN FILM LINE - Mono Layer

Listing #

12824

Manufacturer

MPC

Model

LLDPE

L/D Ratio

Size

120 MM

Year

1985

1985 MPC blown film line for LLDPE, with 120 mm extruder. The line includes: 300 HP DC motor and controller, resin hopper with additive feeders, temperature control panel, manual screen changer, 300 mm die and dual lip air ring, air ring blower, Pillar two sided treater with controls, 67" primary nip with collapsing frame and adjustable height, web folder Optional 60" or 70" dual turret winder for 22,000 USD additional

SLITTER/REWINDER - Duplex Center Wind

Listing #

12980

Manufacturer

Titan

Model

SR5

L/D Ratio

Size

53"

Year

1996

Used 53" Titan SR5 slitter, 53 inch web, razor and sheer slitting, 48 inch maximum diameter integral unwind, 32 inch maximum diameter duplex rewind. The machine includes an unloading tree.

BAG MACHINE - Bottom Seal

Listing #

12989

Manufacturer

Weist

Model

W80

L/D Ratio

Size

60"

Year

Weist Bottom Seal Bag Machine, can be used inline or out of line. Produces bags up to 60" wide. Flying Knife is cutting method. Very Clean. There are 2 units available. The price quoted is for each unit.

CAST FILM LINE - Single Layer

Listing #

12822

Manufacturer

Welex

Model

L/D Ratio

Size

50"

Year

Used- Welex 53'' Wide Sheet Line Consisting Of: (1) Welex 4-1/2'' single screw extruder, model 450-30 serial # 385, approximate 30:1 L/D ratio, approximately 8 zone side vented barrel, electrically heated, air cooled. Water cooled feed throat, no hopper. Approximate 57'' centerline height. Driven by a 200 hp, 500 volt, 1750/200 rpm DC motor thru a Welex change gear reducer, ratios 11.74/ 14/ 17.55/ 23.47 to 1. Control panel with an Watlow SD temperature controllers, and a Safetronics drive. (1) Dynisco screen changer with a power pack, (1) Maag gear pump, model EX70-4STE, approximate 25 hp motor, and (1) 56" wide EDI sheet die, model UH-100, serial# 05-25154, all 3 mounted on a cart. (1) Welex 3 roll sheet stack. (3) 18" diameter x 53" wide chrome plated cored rolls with pumps, control panel, and 12' long cooling section. (1) Pull roll stand, (2) 8'' diameter x 53'' wide rubber rolls. (1) 72" wide winder.